Telephone

+86 138 3118 3168

Fax

+86 311 6779 4622

Home > News > News

What is the Correct Stacking Method for Ductile Iron Pipes?

Apr. 14, 2021

As a Ductile Iron Pipe Manufacturers, share with you.

We all know that ductile iron pipe is a relatively large pipe, and it is more troublesome to store and store, but if you follow the following guidelines, then you will find that storage is actually the same! We still have some skills in the storage and storage of ductile iron pipes. Let's share with you below!

Cast Iron Sewer Pipe

Cast Iron Sewer Pipe

The criterion for stacking ductile iron pipes is to stack them according to types and specifications under the conditions of stable stacking and ensuring safety. Different types of materials must be stacked separately to avoid mixing and mutual corrosion. Stop storing items that are corrosive to steel in the vicinity of the stack. The bottom of the stack should be raised, consolidated, and leveled to avoid moisture or deformation of the data.

The same kind of data is stacked separately according to the order of storage, which facilitates the implementation of the first-in, first-ship criterion. For section steel stacked in the open, there must be wooden mats or slabs underneath, and the stacking surface is slightly inclined to facilitate drainage, and pay attention to the materials to be placed flat and straight to avoid bending and deformation. The stacking height does not exceed 1.2m for manual operations, 1.5m for mechanical operations, and 2.5m for stack widths.

There should be a certain passage between the stack and the stack. The inspection channel is generally 0.5m, and the access channel depends on the size of the data and the transportation machinery, and the general is 1.5~2.0m. The bottom of the stack is raised. If the warehouse is in the cement sky of Chaoyang, The height of 0.1m is enough; if it is mud ground, it must be raised 0.2~0.5m. If it is an open field, the height of cement aerial is 0?3~0.5m, and the height of sand and mud surface is 0.5~0.7m. The channel steel should be laid down, that is, the mouth should be facing down, and the I-beam should be placed upright. The I-slot surface of the steel should not be facing upwards, and the ductile iron pipe should be used to prevent water from rusting.

Our company also has Cast Iron Sewer Pipe on sale, welcome to contact us.


15033222556 15033233665 info@reanod.com 2850929966